Soliton at MIPI Taipei 2026: I3C Plugfest, Demo Day and Working Group Meetings
← Back to events
2026Past eventOctober 30, 2026

Soliton at MIPI Taipei 2026: I3C Plugfest, Demo Day and Working Group Meetings

In October 2026, Soliton spent a week in Taipei with the MIPI Alliance. The week had three parts. We tested devices at the MIPI I3C Plugfest and demonstrated our Protocol Validation Suites at MIPI Demo Day. At the MIPI Member Meeting, we presented updates to the conformance test specifications we help write for MIPI SWI3S® and MIPI I3C®.

MIPI I3C Plugfest

The I3C Plugfest is a multi-vendor interoperability event that the MIPI Alliance hosts for implementers of MIPI I3C, I3C Basic and related specifications. Engineers bring controllers, targets, IP cores and protocol analysers and test them against each other’s implementations.

Around 15 companies took part this year, over two days. Soliton ran interoperability and compatibility checks with 8 of them during the event, and we are continuing validation with the rest. Most teams asked for focused checks, such as CTS-only runs or timing sweeps, rather than general interoperability tests.

image (1).jpg


MIPI Demo Day

image (2).jpg


MIPI Demo Day is a single-day event where member demos and the MIPI Education Series run side by side. Soliton was one of 16 companies to demonstrate in Taipei. Our booth covered:

Digital protocol Validation Solutions:

  1. I3C - I3C® Protocol Validation Suite & Services | Soliton Technologies 
  2. Soundwire - SoundWire Protocol Validation Suite | Soliton Technologies 
  3. SWI3S - SoundWire-I3S Protocol Validation Suite | Soliton Technologies 

Protocol Analyzer solutions - Protocol Analyzer | Oscilloscope-Agnostic | Soliton Technologies 


MIPI Member Meeting: Audio Working Group

MIPI Member Meetings are weeklong, in-person working events. The MIPI Alliance holds them three times a year so that member companies can develop specifications and set technical priorities.

Soliton is a MIPI member and a contributor to the MIPI SWI3S CTS. We presented the latest update to the SWI3S CTS draft. We also ran a live demo of the SWI3S Protocol Validation Suite, with the SWI3S analyser decoding signals and showing register status as they ran.


MIPI Member Meeting: I3C Working Group

Soliton contributes to the HDR-DDR section of the MIPI I3C CTS, covering both target and controller. We presented the latest update to the draft. Questions raised in the meeting were resolved and documented afterwards.

Have a similar challenge?

Tell us what you're working on. We'll walk you through how we'd approach it.

Talk to a Soliton Engineer